How do I setup wavlink quantum d4g?

The wavlink quantum d4G extender increases your wifi network or connection, providing continuous game play, movie video streaming, and web series watching. The Wavlink AC1200 Extender Setup offers amazing WiFi coverage throughout your homes and places of business due to its 4 external antennas. A wavlink quantum d4 is quite easy to set up. The device may connect to any network in only 15 seconds because it is plug-and-play. Depending on what you need, you can configure the wavlink quantum d4 extender in router, repeater, or access point mode. Note that the wavlink Extender needs to be reset or changed whenever the mode is changed.

Wavlink Quantum AC1200 d4g Installation 

The following are the setup instructions for the wavlink quantum d4g extender:

  • Use an Ethernet wire to link your extension and router.
  • Wait for the stability of the LED light.
  • The WPS button can now hold down for 5 seconds.
  • The lights on both of them will start blinking after 15 to 20 seconds, showing that the connection is working.
  • Now that it is unplugged, you can use a quantum d4g range extender setup to place your new extender wherever you want.
  • “SSID EXT” will come up in your wifi list once you’ve entered the same login for both your router and the new extender setup.

Note: If you need any assistance regarding your wavlink quantum d4 extender so contact our technician or visit the official website that is ap extender login.

Wavlink quantum d4 setup with using wps method

begin to learn about another way to set up or install your wavlink quantum d4g extender, known as the wireless protected setup, or WPS setup. You may configure your repeater with the support of wireless protected setup in only 2 to 3 minutes. No account, password, or SSID has to be given during this process.There will be only a single small button to press.

Follow these easy steps to set up a wavlink quantum d4g using WPS:

  • Turn on your wavlink quantum d4g extender.
  • Place your extender near your router at home.
  • Then press the WPS button on your repeater.
  • Furthermore, press the WPS button on your home router.
  • If a stable green WPS light flashes
  • It shows that the extender’s and router’s connection is good.
  • Disconnect the plug from your extension and set it anywhere you want.
  • Now connect the expanded network with your other wifi-enabled devices.

How can I upgrade the firmware of the wavlink quantum d4g range extender?

To update your wavlink quantum d4g Firmware, look for updates containing functionality, improvements, and bug fixes for your extender.

To update the firmware on your wavlink quantum d4g, let’s use the functional elements listed below:

  1. Open your web browser here.
  2. Enter wifi.wavlink.com in the field for the URL.
  3. Fill in the spaces using your default password.
  4. Click the login button for logging in.
  5. Install the latest wavlink quantum d4g firmware after that.
  6. When it’s completed, select setup.
  7. Your extender will restart as soon as the firmware has been updated.

How do I reset wavlink quantum d4g?

Reset your wavlink quantum d4g is simple and can be done using the following methods:

  • Every smart device must be turned on first.
  • An optical cable should be used to connect your device and router.
  • Check for the reset button on the Ac1200 rear.
  • Press and hold the reset button to restart your router.
  • Put a sharp pin in the reset button.
  • Keep holding it for eight to ten seconds.
  • Check if the LED status on your AC1200 is flashing.