MSRM US753 Extender Setup

Known for producing Wi-Fi routers and a variety of extenders, MSRM US753 Extender Setup. Network rates of up to 300 MB/s are supported by the MSRM US753. It has a 172-metre range. Both 2.4GHz and 5GHz networks are supported by its twin antenna technology. Using the “Dual-Rotation” antennae, this Wi-Fi range extender gets rid of any obstructions like walls, mobile devices, and other things. With the 802.11b/g/n feature, you get fast, reliable, and consistent speeds

MSRM US753 Wifi Extender Setup process

Installation steps for the MSRM US753 Extender are provided below:

  • First, set up your router in the same room as the MSRM US753 Extender.
  • Verify that the extender is receiving at least 50% of the router’s signals.
  • Activate both your router and the extender.
  • After a few seconds, check to see if the LED light has changed to green.
  • After gaining access to the wifi settings on your computer, tablet, or smartphone, connect to the MSRM US753 Extender setup.
  • They will immediately connect to your device, so there is no need to input a password the first time.
  • They did not display any indication of internet connectivity after connecting but before starting any web browsers.
  • Type the AP.setup command.
  • Enter setup or to access the login screen.

Note: If you need any help regarding your MSRM US753 Extender so feel free and visit ap extender setup for better assistance.

MSRM US753 Wifi Extender Setup

How can i setup MSRM US753 Extender via wps button

MSRM US753 Wifi Extender Setup

Press the WPS button to connect your WiFi range extender to the AP. Follow these procedures to set up your new extender arrangement:

  • Connect your Ethernet cable first to your router and extender.
  • Give the LED light a time to settle before continuing.
  • Next, continue to press the WPS button hard for 5 seconds.
  • The lights on both devices will start to flicker after 15 to 20 seconds, indicating a successful connection.
  • Since it has been unplugged, your new extender can now be positioned wherever you choose utilising a range extender arrangement.
  • Your MSRM US753 WiFi Extender Setup using the WPS method is now complete.

MSRM US753 Extender Firmware update

  • Make sure your extender is connected to a power source by “ON” and that it is wired.
  • Turn on Wi-Fi, then look for and join a network that says “MSRM-xxx” using your phone, laptop, or other mobile device. It won’t have a password or encryption at first.
  • Check for “” after opening the window on the same device. http:/ap.setup/admin. You will now be taken to a screen where you must provide a password and an administrative username. Write “admin” in the “Name” and “Password” dialog boxes, respectively.
  • Go to Administration System Upgrade under the “home” tab. The Automated Upgrades page will open when you click “Upgrade the firmware.” In order to update the firmware if necessary, make sure you have a secure internet connection.
MSRM US753 Extender Firmware update
MSRM US753 Wifi Extender Setup

MSRM US753 Wifi Extender Reset

MSRM US753 Wifi Extender Reset

Follow these steps to reset your MSRM US753 WiFi Extender:

  1. Start up your MSRM US753 after connecting it in.
  2. Wait until the green light is solid and constant before proceeding.
  3. Find the hole for the factory reset.
  4. From the side of the extender, you might be able to access it.
  5. Pick up a reliable paper clip or pin.
  6. Insert the paper clip or pin into the hole, then hold it in place for 8 to 10 seconds.
  7. When the power light is a solid green colour, remove the paper clip.